Embedded condenser microphone RX-J80

The microphone connection port adopts a standard 3-pin Canon male XLRM, which can be connected to any conference microphone holder designed with a 3-pin Canon female XLRF. Or it can be directly connected to the mixer.

Product number:RX-J80

Category：

Capacitive unit

Download：

Message Us

Description
Technical Specs
Connection

Ø Built-in high-pass filter, which can attenuate low-frequency noise without sacrificing the sound quality.

Ø Built-in microphone preamplifier power supply components. No need to use external power supply modules.

Ø The microphone pole is designed with double hoses.

Ø The microphone connection port adopts a standard 3-pin Canon male XLRM, which can be connected to any conference microphone holder designed with a 3-pin Canon female XLRF. Or it can be directly connected to the mixer.

Ø Desktop anti-vibration microphone holder is optional. Users can install the microphone holder on the desktop or other boards, which can reduce the knocking and vibration sound.
Keywords:
- Embedded condenser microphone

Mode	RX-J80
Pickup	electrostatic capacitive
Pointing properties	cardioid single pointing
frequency response	80-16，000Hz
High pass filtering	＞80Hz,18dB/octave
sensitivity	＞-45dB(7.0mv)1V/1Pa
Output impedance	200Ω
Maximum withstand sound pressure	140dB sound pressure，1KHz/1% T,H,D
Dynamic range (typical)	111dB,1KHz Max sound pressure
SNR	665dB,1KHz于1Pa
Phantom power supply	DC 9-52V power consumption 2mA typical
Switch	Flat High Pass Filter
Overall dimension	length: 495mm，Pickup diameter：12.3mm, Bottom plug diameter：18.9mm
Output connector	Built in 3-pin XLR male