Condenser large-diaphragm microphone RX-J
The microphone connection port adopts a standard 3-pin Canon male XLRM, which can be connected to any conference microphone holder designed with a 3-pin Canon female XLRF. Or it can be directly connected to the mixer.
- Technical Specs
Ø Using 14mm diameter gold-plated condenser microphone core. The pickup distance can reach more than 80CM
Ø Built-in high-pass filter, which can attenuate low-frequency noise without sacrificing the sound quality.
Ø Built-in microphone preamplifier power supply components. No need to use external power supply modules.
Ø The microphone pole is designed with double hoses.
Ø The microphone connection port adopts a standard 3-pin Canon male XLRM, which can be connected to any conference microphone holder designed with a 3-pin Canon female XLRF. Or it can be directly connected to the mixer.
Ø Desktop anti-vibration microphone holder is optional. Users can install the microphone holder on the desktop or other boards, which can reduce the knocking and vibration sound.Keywords:
- Condenser large-diaphragm microphone
Parameter RX-J Condenser Large Diaphragm Microphone Pickup Head Electrostatic Condenser Directional characteristics; Cardioid unidirectional Frequency Response 80-16,000Hz High pass filter 80Hz,18dB/octave Sensitivity -45dB(7.0mv) at 1V at 1Pa Output impedance 200 Maximum sound pressure 140dB sound pressure，1KHz at 1% T,H,D，Dynamic range (typical)：111dB,1KHz at maximum sound pressure Signal-to-noise 65dB,1KHz at 1Pa Phantom power DC 9-52V power consumption 2mA typical On/Off Flat High Pass Filter Dimensions Length：495mm，Diameter of Pickup Head：12.3mm, Diameter of Bottom Plug：18.9mm Output Connector Built-in 3-pin XLR male
Get in touch with us